In the Linux kernel, the following vulnerability has been resolved:
hfs: fix potential use after free in hfs_correct_next_unused_CNID()
This code calls hfs_bnode_put(node) which drops the refcount and then
dreferences "node" on the next line. It's only safe to use "node"
when we're holding a reference so flip these two lines around.
In the Linux kernel, the following vulnerability has been resolved:
net: netpoll: initialize work queue before error checks
Prevent a kernel warning when netconsole setup fails on devices with
IFF_DISABLE_NETPOLL flag. The warning (at kernel/workqueue.c:4242 in
__flush_work) occurs because the cleanup path tries to cancel an
uninitialized work queue.
When __netpoll_setup() encounters a device with IFF_DISABLE_NETPOLL,
it fails early and calls skb_pool_flush() for cleanup. This function
calls cancel_work_sync(&np->refill_wq), but refill_wq hasn't been
initialized yet, triggering the warning.
Move INIT_WORK() to the beginning of __netpoll_setup(), ensuring the
work queue is properly initialized before any potential failure points.
This allows the cleanup path to safely cancel the work queue regardless
of where the setup fails.
In the Linux kernel, the following vulnerability has been resolved:
crypto: starfive - Correctly handle return of sg_nents_for_len
The return value of sg_nents_for_len was assigned to an unsigned long
in starfive_hash_digest, causing negative error codes to be converted
to large positive integers.
Add error checking for sg_nents_for_len and return immediately on
failure to prevent potential buffer overflows.
In the Linux kernel, the following vulnerability has been resolved:
NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags
When a filesystem is being automounted, it needs to preserve the
user-set superblock mount options, such as the "ro" flag.
In the Linux kernel, the following vulnerability has been resolved:
mt76: mt7615: Fix memory leak in mt7615_mcu_wtbl_sta_add()
In mt7615_mcu_wtbl_sta_add(), an skb sskb is allocated. If the
subsequent call to mt76_connac_mcu_alloc_wtbl_req() fails, the function
returns an error without freeing sskb, leading to a memory leak.
Fix this by calling dev_kfree_skb() on sskb in the error handling path
to ensure it is properly released.
In the Linux kernel, the following vulnerability has been resolved:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
If irq_domain_translate_twocell() sets "hwirq" to >= MCHP_EIC_NIRQ (2) then
it results in an out of bounds access.
The code checks for invalid values, but doesn't set the error code. Return
-EINVAL in that case, instead of returning success.
In the Linux kernel, the following vulnerability has been resolved:
s390/fpu: Fix false-positive kmsan report in fpu_vstl()
A false-positive kmsan report is detected when running ping command.
An inline assembly instruction 'vstl' can write varied amount of bytes
depending on value of 'index' argument. If 'index' > 0, 'vstl' writes
at least 2 bytes.
clang generates kmsan write helper call depending on inline assembly
constraints. Constraints are evaluated compile-time, but value of
'index' argument is known only at runtime.
clang currently generates call to __msan_instrument_asm_store with 1 byte
as size. Manually call kmsan function to indicate correct amount of bytes
written and fix false-positive report.
This change fixes following kmsan reports:
[ 36.563119] =====================================================
[ 36.563594] BUG: KMSAN: uninit-value in virtqueue_add+0x35c6/0x7c70
[ 36.563852] virtqueue_add+0x35c6/0x7c70
[ 36.564016] virtqueue_add_outbuf+0xa0/0xb0
[ 36.564266] start_xmit+0x288c/0x4a20
[ 36.564460] dev_hard_start_xmit+0x302/0x900
[ 36.564649] sch_direct_xmit+0x340/0xea0
[ 36.564894] __dev_queue_xmit+0x2e94/0x59b0
[ 36.565058] neigh_resolve_output+0x936/0xb40
[ 36.565278] __neigh_update+0x2f66/0x3a60
[ 36.565499] neigh_update+0x52/0x60
[ 36.565683] arp_process+0x1588/0x2de0
[ 36.565916] NF_HOOK+0x1da/0x240
[ 36.566087] arp_rcv+0x3e4/0x6e0
[ 36.566306] __netif_receive_skb_list_core+0x1374/0x15a0
[ 36.566527] netif_receive_skb_list_internal+0x1116/0x17d0
[ 36.566710] napi_complete_done+0x376/0x740
[ 36.566918] virtnet_poll+0x1bae/0x2910
[ 36.567130] __napi_poll+0xf4/0x830
[ 36.567294] net_rx_action+0x97c/0x1ed0
[ 36.567556] handle_softirqs+0x306/0xe10
[ 36.567731] irq_exit_rcu+0x14c/0x2e0
[ 36.567910] do_io_irq+0xd4/0x120
[ 36.568139] io_int_handler+0xc2/0xe8
[ 36.568299] arch_cpu_idle+0xb0/0xc0
[ 36.568540] arch_cpu_idle+0x76/0xc0
[ 36.568726] default_idle_call+0x40/0x70
[ 36.568953] do_idle+0x1d6/0x390
[ 36.569486] cpu_startup_entry+0x9a/0xb0
[ 36.569745] rest_init+0x1ea/0x290
[ 36.570029] start_kernel+0x95e/0xb90
[ 36.570348] startup_continue+0x2e/0x40
[ 36.570703]
[ 36.570798] Uninit was created at:
[ 36.571002] kmem_cache_alloc_node_noprof+0x9e8/0x10e0
[ 36.571261] kmalloc_reserve+0x12a/0x470
[ 36.571553] __alloc_skb+0x310/0x860
[ 36.571844] __ip_append_data+0x483e/0x6a30
[ 36.572170] ip_append_data+0x11c/0x1e0
[ 36.572477] raw_sendmsg+0x1c8c/0x2180
[ 36.572818] inet_sendmsg+0xe6/0x190
[ 36.573142] __sys_sendto+0x55e/0x8e0
[ 36.573392] __s390x_sys_socketcall+0x19ae/0x2ba0
[ 36.573571] __do_syscall+0x12e/0x240
[ 36.573823] system_call+0x6e/0x90
[ 36.573976]
[ 36.574017] Byte 35 of 98 is uninitialized
[ 36.574082] Memory access of size 98 starts at 0000000007aa0012
[ 36.574218]
[ 36.574325] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G B N 6.17.0-dirty #16 NONE
[ 36.574541] Tainted: [B]=BAD_PAGE, [N]=TEST
[ 36.574617] Hardware name: IBM 3931 A01 703 (KVM/Linux)
[ 36.574755] =====================================================
[ 63.532541] =====================================================
[ 63.533639] BUG: KMSAN: uninit-value in virtqueue_add+0x35c6/0x7c70
[ 63.533989] virtqueue_add+0x35c6/0x7c70
[ 63.534940] virtqueue_add_outbuf+0xa0/0xb0
[ 63.535861] start_xmit+0x288c/0x4a20
[ 63.536708] dev_hard_start_xmit+0x302/0x900
[ 63.537020] sch_direct_xmit+0x340/0xea0
[ 63.537997] __dev_queue_xmit+0x2e94/0x59b0
[ 63.538819] neigh_resolve_output+0x936/0xb40
[ 63.539793] ip_finish_output2+0x1ee2/0x2200
[ 63.540784] __ip_finish_output+0x272/0x7a0
[ 63.541765] ip_finish_output+0x4e/0x5e0
[ 63.542791] ip_output+0x166/0x410
[ 63.543771] ip_push_pending_frames+0x1a2/0x470
[ 63.544753] raw_sendmsg+0x1f06/0x2180
[ 63.545033] inet_sendmsg+0xe6/0x190
[ 63.546006] __sys_sendto+0x55e/0x8e0
---truncated---
In the Linux kernel, the following vulnerability has been resolved:
iavf: Implement settime64 with -EOPNOTSUPP
ptp_clock_settime() assumes every ptp_clock has implemented settime64().
Stub it with -EOPNOTSUPP to prevent a NULL dereference.
The fix is similar to commit 329d050bbe63 ("gve: Implement settime64
with -EOPNOTSUPP").
In the Linux kernel, the following vulnerability has been resolved:
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
In the DSP event handling code, a put_user() loop copies event data.
When the user buffer size is not aligned to 4 bytes, it could overwrite
beyond the buffer boundary.
Fix by adding a bounds check before put_user().
In the Linux kernel, the following vulnerability has been resolved:
rtc: amlogic-a4: fix double free caused by devm
The clock obtained via devm_clk_get_enabled() is automatically managed
by devres and will be disabled and freed on driver detach. Manually
calling clk_disable_unprepare() in error path and remove function
causes double free.
Remove the redundant clk_disable_unprepare() calls from the probe
error path and aml_rtc_remove(), allowing the devm framework to
automatically manage the clock lifecycle.
In the Linux kernel, the following vulnerability has been resolved:
staging: most: remove broken i2c driver
The MOST I2C driver has been completely broken for five years without
anyone noticing so remove the driver from staging.
Specifically, commit 723de0f9171e ("staging: most: remove device from
interface structure") started requiring drivers to set the interface
device pointer before registration, but the I2C driver was never updated
which results in a NULL pointer dereference if anyone ever tries to
probe it.
In the Linux kernel, the following vulnerability has been resolved:
block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lock
blk_mq_{add,del}_queue_tag_set() functions add and remove queues from
tagset, the functions make sure that tagset and queues are marked as
shared when two or more queues are attached to the same tagset.
Initially a tagset starts as unshared and when the number of added
queues reaches two, blk_mq_add_queue_tag_set() marks it as shared along
with all the queues attached to it. When the number of attached queues
drops to 1 blk_mq_del_queue_tag_set() need to mark both the tagset and
the remaining queues as unshared.
Both functions need to freeze current queues in tagset before setting on
unsetting BLK_MQ_F_TAG_QUEUE_SHARED flag. While doing so, both functions
hold set->tag_list_lock mutex, which makes sense as we do not want
queues to be added or deleted in the process. This used to work fine
until commit 98d81f0df70c ("nvme: use blk_mq_[un]quiesce_tagset")
made the nvme driver quiesce tagset instead of quiscing individual
queues. blk_mq_quiesce_tagset() does the job and quiesce the queues in
set->tag_list while holding set->tag_list_lock also.
This results in deadlock between two threads with these stacktraces:
__schedule+0x47c/0xbb0
? timerqueue_add+0x66/0xb0
schedule+0x1c/0xa0
schedule_preempt_disabled+0xa/0x10
__mutex_lock.constprop.0+0x271/0x600
blk_mq_quiesce_tagset+0x25/0xc0
nvme_dev_disable+0x9c/0x250
nvme_timeout+0x1fc/0x520
blk_mq_handle_expired+0x5c/0x90
bt_iter+0x7e/0x90
blk_mq_queue_tag_busy_iter+0x27e/0x550
? __blk_mq_complete_request_remote+0x10/0x10
? __blk_mq_complete_request_remote+0x10/0x10
? __call_rcu_common.constprop.0+0x1c0/0x210
blk_mq_timeout_work+0x12d/0x170
process_one_work+0x12e/0x2d0
worker_thread+0x288/0x3a0
? rescuer_thread+0x480/0x480
kthread+0xb8/0xe0
? kthread_park+0x80/0x80
ret_from_fork+0x2d/0x50
? kthread_park+0x80/0x80
ret_from_fork_asm+0x11/0x20
__schedule+0x47c/0xbb0
? xas_find+0x161/0x1a0
schedule+0x1c/0xa0
blk_mq_freeze_queue_wait+0x3d/0x70
? destroy_sched_domains_rcu+0x30/0x30
blk_mq_update_tag_set_shared+0x44/0x80
blk_mq_exit_queue+0x141/0x150
del_gendisk+0x25a/0x2d0
nvme_ns_remove+0xc9/0x170
nvme_remove_namespaces+0xc7/0x100
nvme_remove+0x62/0x150
pci_device_remove+0x23/0x60
device_release_driver_internal+0x159/0x200
unbind_store+0x99/0xa0
kernfs_fop_write_iter+0x112/0x1e0
vfs_write+0x2b1/0x3d0
ksys_write+0x4e/0xb0
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x4b/0x53
The top stacktrace is showing nvme_timeout() called to handle nvme
command timeout. timeout handler is trying to disable the controller and
as a first step, it needs to blk_mq_quiesce_tagset() to tell blk-mq not
to call queue callback handlers. The thread is stuck waiting for
set->tag_list_lock as it tries to walk the queues in set->tag_list.
The lock is held by the second thread in the bottom stack which is
waiting for one of queues to be frozen. The queue usage counter will
drop to zero after nvme_timeout() finishes, and this will not happen
because the thread will wait for this mutex forever.
Given that [un]quiescing queue is an operation that does not need to
sleep, update blk_mq_[un]quiesce_tagset() to use RCU instead of taking
set->tag_list_lock, update blk_mq_{add,del}_queue_tag_set() to use RCU
safe list operations. Also, delete INIT_LIST_HEAD(&q->tag_set_list)
in blk_mq_del_queue_tag_set() because we can not re-initialize it while
the list is being traversed under RCU. The deleted queue will not be
added/deleted to/from a tagset and it will be freed in blk_free_queue()
after the end of RCU grace period.